By Binks
Pressure feed containers are used to allow the coating material to be prepared, thinned and conditioned, constantly agitated (if required) and then supplied in bulk to consistently maintain the correct spraying viscosity and pressure. The Binks range is equipped with easy to operate air regulators (to set the desired fluid outlet pressure) and safety pressure relief valves. Manual, Rotary or Oscillating agitation types are available to provide the best quality agitation. Binks Pressure Feed Containers are constructed from the highest grade materials and fully comply with European and Global pressure regulations including PED, ATEX and ASME.
Features:
- Fully approved and CE marked to the latest pressure equipment directive 97/23/EC
- Constructed from Heavy Gauge steel with forged steel clamps
- St St & Carbon Steel Plated range covers all industrial applications
- Higher pressure rating handles heavier materials
- Range offers complete material handling suitability for solvent and waterborne coatings
- Inner Liners reduce cleaning time and save coating material
- Top and Bottom outlet conversion kits available
- Single air regulator as standard with optional dual outlet kits
- Spare Parts
- Specifications
- Literature
| Item No. | Part No. | Description |
| 1 | Retaining nut | |
| 2 | Thrust washer | |
| 3 | - | Thrust collar |
| 4 | - | Set screw 5/1618 x 3/8) |
| 5 | Thrust collar kit (incl 4 & 5) | |
| 6 | Bearing assy-plain steel | |
| 7 | O-ring (kit of 2) | |
| 8 | - | Shaft seal 5/8 I.D. |
| 9 | - | Internal retaining ring |
| 10 | Shaft seal kit (incl 8 & 9) | |
| 11 | Plug (non-agitated medels only) 1-1/4 NPS | |
| 12 | Safety valve assy, 110 PSI | |
| 13 | Air manifold 1/2 NPT | |
| 14 | | |
| 15 | | |
| 16 | Fill port cap gasket 1-1/4 NPS | |
| 17 | Street elbow, 3/8-18 NPT, S.S. 3/8 NPT | |
| 18 | Ball valve, 38 NPS outlet, S.S. | |
| 19 | Tank lid | |
| 20 | Tank gasket | |
| 21 | - | Plug, 1/2-14 NPT, S.S. |
| 22 | Fluid tube | |
| 23 | Agitator shaft | |
| 24 | - | Agitator paddle |
| 25 | - | SOC head cap screw, 5/16-18 x 1-1/4, S.S. |
| 26 | Agitator paddle kit (incl 24 & 25) | |
| 29 | Disposable tank liner, 5 gal | |
| 30 | Thumb screw (see item 34) | |
| 31 | - | Cotter pin, 1/8 dia. x 1" lg. (see item 34) |
| 32 | - | |
| 33 | - | Clamp (see item 34) |
| 34 | Clamp, pin & screw kit | |
| 35 | Tank & lug assy, 5 gal. | |
| 36 | - | Bottom plug 3/4 NPT |
| 37 | Air hose assy. (incl w/item 38) | |
| 38 | - | Air control |
| 39 | Air motor/gearbox drive - 183S-XXX3 | |
| 39 | Air motor/gearbox drive - 183S-XXX4 |
Kits
| Description | Value |
| Maximum Working Pressure | 110 psi |
| Tank Shell | 304 Stainless Steel |
| Tank Lid | 304 Stainless Steel |
| Fluid Tube | 3/8 in. SS Pipe, 316 Stainless Steel |
| Fluid Outlet (Elbow) | 316 Stainless Steel |
| Fluid Valve, Outlet | 316 Stainless Steel 3/8-18 NPS(M) |
| Agitator Paddle/Propeller | Nylon, Glass Filled |
| Agitator Shaft | 303 Stainless Steel |
| Agitator Shaft Seal | Engineered PTFE, Stainless Steel |
| Air Manifold | Steel, Zinc Plate |
| Plug (Air Manifold Coupling) | 18-8 Stainless Steel |
| Bottom Outlet (Optional Kit) | 304 Stainless Steel 3/4-14 NPS(M) |
| Nominal Capacity: 5 Gallons | Acual Capacity: 9.8 Gallons |